The flywheel sits on a precision ground flange adapter ring assuring parallelism to the crankshaft flange. No indicating, no guessing, no scratch tests!
The grinding head tilt is factory set for fastest grinding and the best surface finish, and can be further adjusted for even greater precision
The FG column are chromed and precision ground with the largest diameters in the industry!
FG5000 - 4.437”
FG10000 - 5.50”
Cast for strength, stability and perfect alignment, the columns are constantly lubricated by an internal wick
The flywheel sits on a precision ground flange adapter ring assuring parallelism to the crankshaft flange. No indicating, no guessing, no scratch tests!
The grinding head tilt is factory set for fastest grinding and the best surface finish, and can be further adjusted for even greater precision
Van-Norman Flywheel Grinders
Heavy-duty column assembly and grinding head tilt that can be adjusted for precision results!
- Our column diameters are thelargest in the industry: FG5000 is 4.437” and FG10000 is 5.50”
- Columns are chromed, precision ground, and areconstantly lubricatedby a felt wick installed within the column mounting flange
- A rubber boot keeps the columns completelyprotected from grinding debris and coolant
- 1.250” ACME lead screwis the largest on any flywheel grinder
- Heavy duty bronze lead screw nut is adjustableto take any “play” that may occur throughout the life of the machine
The flywheel sits on a precision ground flange adapter ring assuring parallelism to the crankshaft flange. No indicating, no guessing, no scratch tests!
HD Brake Resurfacer
Versatile design and accessory tooling that is outside the box. Gives you more than just Flywheels to profit from. Heavy duty vehicles now have Disc Brakes and you can’t put these huge rotors on a brake lathe, plus they are expensive to replace. But your Van Norman Flywheel Grinder can restore heavy duty rotors to like new.
Exclusive Direct Drive Gear Reduction Unit
- Rugged, Industrial Design
- Heavy Duty ⅓ H.P. Table Motor
- Delivers consistent torque to the table
- Requires no maintenance
- Has no chains or belts to lubricate, adjust, or replace
Unique Industry Leading Design
The competition wishes they thought of first!
- Grind you own flywheels,finish the job fast
- Minimize idle rack time,maximize profits
- Quick and accurate setup
- Grind most automotive and light truck flywheels floor to floor in5 - 10 minutes*
- Takes up very little floor space and willlast for many years
- Excellent investment:just a few dollars per dayto own
- Minimal supply costs and low labor costs:anyone can operate onewith ease
*Slightly longer for the heavy duty stepped flywheels
Hard Spots? Heat Checks? No Problem
整个表面的摩擦地面,屁股uring fast, accurate results every time. Plunge grinding produces a “swirl finish” or a “cross hatch finish”, if preferred. Also, the operator has total control over the surface finish - the longer the sparkout, the smoother the finish.