菜单
+1-319-377-9421
接触
account_circle
购物车
冲洗您的冷却系统

如何执行加热器核心冲洗液像专业的机械师一样

加热器核荷斯

所有汽车都需要维护,这包括预定的冲洗,以使其保持正常并顺利运行。

If you notice that your car is starting to overheat, or you notice that there’s no heat at all, something may be wrong. These are issues that should not be ignored, especially if you want your car to live a long and happy life, full of safe trips.

确保健康车辆的一种方法是执行常规加热器核心冲洗。如果您不知道那是什么,请继续阅读。

How Will I Know if I Need a Heater Core Flush?

有一些蛛丝马迹,你的汽车需求a heater core flush. Heater core issues are unique, especially since one of those potential issues is the leaking into your interior.

Typically when heater core problems present themselves, it’s due to poor cooling system maintenance. You should be flushing and replacing your coolant accordingly with your owner’s manual. This will help to prevent the build-up of dirt, debris, and rust particles in the narrow passages—which ultimately causes clogs and damage.

Here are some of those telltale signs:

  1. 您的车似乎没有热身。它运行良好,温度规读取正常,并且没有其他冷却液系统问题。除了打开热量时缺乏热量。
  2. 您的车内有一种未知的甜香气。那就是冷却液的气味,它可能会轻轻地喷入您的内部。这是一个预警信号。
  3. 您的窗户雾化。如果您的冷却时间足够长,可以覆盖窗户。残留物很难清理,在乙烯乙二醇中呼吸对您的健康非常有害。
  4. Something’s leaking from under your dashboard.If you notice front carpet stains or dripping from under the dashboard, it’s coolant leaking into your car.
  5. 您的引擎正常运行。If this is the case, check your coolant level. If it’s running low and your temperature gauge is running high, you’re going to want to get to a mechanic.

如果您对机械师不方便,则加热器核心更换的费用最高为950美元。这就是为什么您要执行常规加热器芯冲洗,以免避免高加热器核心更换成本。并呼吸毒。

分步加热器核心冲洗

A heater core flush is something that you can absolutely do yourself, even if you’re not mechanically inclined. Here’s what you’ll need to get started:

  • 一个大桶
  • Clear tubing
  • 手套
  • Pliers
  • 一把螺丝起子
  • 花园软管
  • 空气压缩机*
  • A ¾” barb fitting adapter
  • 破布
  • 护目镜
  • beplay体育app下地址

*空气压缩机并不是100%强制性的,但是,在进行冲洗之前,这对于放松任何gunk非常有帮助。

If you’re using Irontite products for flushing, coating, and sealing, you’ll want to read the directions thoroughly before beginning this process.

现在,这是执行加热器核心冲洗的方法:

步骤1:找到加热器核心

第一件事是第一件事。您将想找到加热器核心。它将位于您汽车的防火墙上。将会有一个入口和出口软管,一个带有冷却液,另一个将其推回去。您需要将它们追溯到引擎。

If you’re having trouble, refer to your owner’s manual.

步骤2:断开加热器软管

Once you’ve located the heater core and the hoses, disconnect them from the firewall. They’re bound by clamps, which will you’ll need pliers to squeeze or a screwdriver in order to loosen them.

在松开它们之前,请确保将大桶设置在下面。卸下夹具和软管后,冷却液将开始泄漏。您需要抓住一切并适当地处理它,因为它对环境不利。

步骤3:施加压力

If you were able to get your hands on an air compressor, now is the time to use it. You’ll want to make sure that you hook it up to the outlet hose and seal it with a coupler or some duct tape.

This will enable you to build up pressure, loosening any gunk and tough clogs. You should “pressurize” the heater core for up to ten minutes for the best results. Once enough pressure has built up, you can shut off the compressor. (Caution: Too much pressure could cause damage. Most systems can easily withstand 20 to 40psi so to be safe you don’t want to exceed that much pressure.)

在拆下临时压缩机挂钩之前,让所有内容都排出,请注意水桶,以确保它不会溢出。

步骤4:用软管击中它

Once everything seems to have drained, you can remove the air compressor and attach the water hose using the same sealing method. Turn on the hose and let the flushing begin.

一旦水清澈,您就完成了。当然,您可能需要两次重复整个过程以确保成功。一旦所有水都排干,您就可以使用空气压缩机清除多余的水。

步骤5:重新连接加热器软管

Once you’ve successfully flushed and dried your heater core, you’ll want to reattach the hoses. It’s a good idea to have extra clamps on hand in case the old ones break. Make sure the hoses are back on properly and sealed with the clamps.

步骤5A:用Tholo-Flush冲洗整个冷却系统

在这一点上,您将努力进一步努力并使用优质的化学冲洗完全冲洗整个冷却系统并不是一个坏主意。beplay官网违法么beplay体育app下地址Irontite产品Thoro-Flush是最强大的潮红之一,使其成为清理整个冷却系统的理想选择。这是一篇关于如何冲洗汽车的好文章。

步骤6:重新填充冷却液

现在,您可以开始在加热器核心系统中重新填充冷却液。您可以通过卸下散热器盖并将冷却液混合物(最好是50/50的纯防冻剂和蒸馏水混合)来做到这一点。

这部分可能是一个过程,因为您必须运行汽车并让冷却液混合物流过系统,同时也burping the coolant system. Burping will allow trapped air to be released. Air in the system can cause overheating.

不要忘记您的生动产品beplay体育app下地址beplay官网违法么

Older vehicles need a little more TLC, especially when flushing the system. Irontite offers some of the best flush and sealant products on the market. This includes Thoro-Flush, All-Weather Seal, and Ceramic Motor Seal. You can use them separately, or combined for the best results.

如果您对Irontite产品有任何疑问或需要使用的建议,请随时beplay官网违法么接触us出于我们的专业意见。

Baidu