Make your Flywheel Grinder last a lifetime
You’ve invested money, time, and energy to get a flywheel grinder working in your shop. And if you are like most people you are glad you did because it is doing the work, saving you time, and even creating more business. All that adds up to some nice profits for your business.
Get some good habits in place
As you know, grinding flywheels is a rather dirty business. But it doesn’t have to be. There are just a few simple things that need to be done on a regular basis. You should get in the habit of doing these things either right after or right before doing each and every job on the machine.
Flywheel grinding is messy, so clean as you go
Wipe down the machine after you are done. Especially clean the table surface. The coolant you are using is being circulated and it is carrying with it all kinds of debris. The filter system in the grinder is getting the bulk of debris out of the mixture before pumping it back over your part and table, but it doesn’t get everything. So when you are done using the machine you need to wipe off all the splattered coolant mixture. The surfaces need to be clean and free of anything that might interfere with the flange adapters. Your work piece flatness depends on the table surface and the flange adapters.
Keep your coolant clean and filled
Check your mixture level before every job. Keep a bucket of pre-mixed coolant nearby and top off the reservoir tank as needed. DO NOT pour the coolant mixture into the top of the machine. Pour it into the tank below directly. Pouring into the top can contaminate your table lubricant.A clean mixture will always work better at cuttingso be mindful of how long it’s been since you last cleaned your mixture. Coolant concentrate comes in different “flavors”. Some are more “premium” thanothers.
Don’t let your hold down threads get bad
Change out thecenter threadswhen they get worn. Don’t wait for them to become really bad either. Remember, these are inserted with a red lock tight on them so you may have to use a little heat to free them up. Never use an easy-out type of tool and never try to redo the main center threads. These are actually cut into the shaft and damage to them means replacingthe shaftwhich is not a fun job.
Regular Lubrication is important to maintain a long service-free life
An often neglected area for maintenance is the column leadscrew. Your machine came witha small bottle of leadscrew lubricantand about 2 or 4 times a year you should be using a bit of that lubricant on your leadscrew. It is also a very good idea to run your machine column all the way up and back down once in a while. Make this part of this routine we have been discussing. Before starting a grinding process, just run the column all the way to the top and then back into position. This action helps to spread the leadscrew lubricant making it last longer.
Wipe it down often
在将其放在法兰适配器上之前,请务必检查工件是否有任何污垢或碎屑,并确保适配器也清洁并且没有碎屑。研磨飞轮很容易,为您的商店提供了一个很好的利润中心。飞轮和飞轮的磨削将很长时间。采取这几个额外的步骤将阻止您需要拨打支持以帮助您对机器进行维修。并将保持您的machine cutting performance grade flat and beautiful surfaces.
Related posts
Getting the Most Performance out of Your Flywheel Grinder
当你在一个汽车的clut工作ch, you’ll probably need to resurface the flywheel. Some manufacturers even require it to maintain the warranty.
Choosing the Correct Flywheel Grinding Stone
Changing out the grinding stone every time you start on a new flywheel is not a waste of time. Not matching your grinding stone to the material being worked will waste far more time than taking a couple of minutes to switch out the stone.
FG5000 Flywheel Grinder: An Industry Leader in Performance
Do you have the simplest to use, time-tested, easily maintained flywheel grinder on the market? Poorly trained operators and improperly maintained machinery are often cited by OSHA. Why not choose a grinding machine with an uncomplicated interface?
E-Z Lock Insert vs Replacing the Table Shaft
Using threaded inserts in your flywheel grinder table can save you down time and the expense of replacing your table drive shaft. Because if you boogie up the center threads of your flywheel grinder table you have no choice but to replace the drive shaft where those threads are cut.